MICROFIBRE

DANIÈLE

ABOUT

MICROFIBRE DANIÈLE

The microfibre material DANIÈLE is a slightly shiny fabric made with finely woven fibres in an appealing look. The light generates very nice shades on the surface of the material.

It is a very lightweight and soft microfibre without any additional layers. For best cue installation efforts we're combining it with the MARIA microfibre on the inner surfaces of the sleeves.

COLOR OPTIONS

BEIGE

Material color code: Danièle 101

GRAY BEIGE

Material color code: Danièle 103

LIGHT BROWN

Material color code: Danièle 105

BROWN

Material color code: Danièle 120

DARK BROWN

Material color code: Danièle 115

YELLOW

Material color code: Danièle 109

LIGHT BLUE

Material color code: Danièle 132

AZURE

Material color code: Danièle 133

DARK BLUE

Material color code: Danièle 111

KIWI GREEN

Material color code: Danièle 110

SACRAMENTO

Material color code: Danièle 135

RED

Material color code: Danièle 112

BORDEAUX

Material color code: Danièle 117

LIGHT GRAY ROSE

Material color code: Danièle 136

GRAY ROSE

Material color code: Danièle 119

PINK

Material color code: Danièle 211

PURPLE

Material color code: Danièle 113

LIGHT GRAY

Material color code: Danièle 102

GRAY

Material color code: Danièle 108

GRAPHITE

Material color code: Danièle 118

DARK GRAY

Material color code: Danièle 121

BLACK

Material color code: Danièle 116

PRODUCT DATA

MICROFIBRE DANIÈLE

MAIN PRODUCT DATA

  • WEIGHT: 190g/m² +/- 2%
  • THICKNESS: approx. 0.6mm +/- 0,05
  • WEAR LAYER: 100% polyester microfibre
  • BACK LAYER: -
  • COATING: DuPont™ Teflon® fabric protector
  • STANDARDS: -

TECHNICAL DATA SHEET

  • SCRUB TOURS (Martindale): 34,000 tours
  • DRY RUB FASTNESS (EN ISO 105-X12): Level 4
  • WET RUB FASTNESS (EN ISO 105-X12): Level 3-4
  • LIGHT FASTNESS (EN ISO 105-B02): Level 4-5
  • PILLING (EN ISO 12945-2): Level 4
  • MAX. TRACTION CHAIN (EN ISO 13934-1): 700 Newton
  • MAX. TRACTION WEFT (EN ISO 13934-1): 1100 Newton
  • SEAM SHEAR STRENGTH (EN ISO 13936-2): 2,4mm @ 100N
  • SEAM SHOOT STRENGTH (EN ISO 13936-2): 2,4mm @ 100N

MAINTENANCE

Before cleaning, the interior should be freed of coarse dirt. You can carefully vacuum the interior with a hand vacuum cleaner.

The cleaning of this material should only be done by hand, with a soft, clean and slightly scrape cloth. Do not apply too much force, pressure or aggressive chemicals.

G-DESIGN assumes no liability for damage caused by improper cleaning or misuse.

DURABILITY

The material was randomly tested, the o.g. test results represent average values.

Intensive use may lead to linting, depending on the material (pilling). Please note if necessary the o.g. value for pilling resistance.

COLOR

We strive for true color representation of our fabric and leather pictures. The actual colors of the material may be slightly different from the screen for technical reasons.

Strong colors can lose some of their intensity over time and dark colors can lighten up a bit.